Tank Pad and Fuel Cap Pad Apache RTR 4V (Non - ABS)
Material : 3D Printing Multi-layer Vinyl and Resin
Fits : Apache RTR 4V (Non - ABS)
High Quality Epoxy and Self Adhesive
Excellent Machine Cut Outlines.
Easy Peel N Stick Application, Strong Glue.
Tank Pad covers maximum top area protecting from direct sun light and scratches.
Fuel Cap Pad with matching graphics of Tank Pad.
Yoke Pads Protects against scratches caused by lengthy and hard key-chains
Contents : One Fuel Cap Pad.
One Tank Pad Set (4 Pcs)
Application Tips :
1. Prior to installing your new tank pad, set it in the sun or gently heat with a hair dryer and allow it to warm and soften, so that the tank pads will conform to your motorcycle tank contours. NOTE: Some air bubbles will need to be smoothed out.
2. Application surface must be clean, dry and free of dirt, oil and grease.
3. Make sure alignment of the tank protectors is perfect before application.
4. Remove backing wax paper from the tank pad and apply.
5. Start from one side and smooth out any air bubble as you go along.
Pimp your sport bike with this genuine product - this is a top quality tank pad to have your motorcycle stand out in the crowd. As you know, your sport bike is designed for your body to hug the gas tank! Protect your motorcycle tank from scratches caused by jacket zippers or belt buckles!
NOTE : Actual colors may slightly vary due to monitor settings and lighting source during photo shoot.